Is this a mirror problem? Not sure what's causing this.. (60w, big red, omtech). Different results around the bed especially with the front right side.
Yeah as @vinny said, unlevel bed - which sucks to deal with D: let us know what happens. On the off chance your bed IS level, and it probably isn't, it could also be that your mirror alignment is whacked in those corners, those are the two furthest corners from the second mirror and thus have the most issues with alignment at max. Might want to do a mirror alignment as well.
The bed's not level. Get a measuring stick, like a digital caliper, and go to the back right and measure the distance to the bed. Then go to the back left, it should be the same, Repeat with the front right and left. All should be the same. If any are off, you'll need to raise or lower just that end. Do that by either loosening the belt and turning that screw, or if yours will allow, loosen the sprocket on the one that needs adjusting and turn the screw.
